Polyaspartic acid (PASP), as an important polymer material, its storage method and usage precautions are crucial to ensure its stable performance and safe use. The following is an description of the storage method and usage precautions for polyaspartic acid.

Storage Method of Polyaspartic Acid         

Temperature control: Kyselina polyasparágová should be stored in a low-temperature environment, and the recommended storage temperature is below -20 ° C. Low temperature storage helps slow down the degradation rate of materials, while maintaining their chemical stability and physical properties.

Light avoidance treatment: Due to the possibility of photochemical reactions of polyaspartic acid caused by light exposure, its performance should be affected. Therefore, when storing, the container should be completely protected from light and avoid direct sunlight.

Humidity control: Kyselina polyasparágová is prone to moisture absorption, and the storage environment should be kept dry to avoid material deliquescence or deterioration caused by high humidity.

Packaging requirements: Storage containers should be made of materials with good sealing properties, such as glass bottles, plastic bottles, etc., and ensure that the container is filled with inert gas (such as argon) to eliminate oxygen and reduce the occurrence of oxidation reactions.

Storage period: The storage period of polyaspartic acid should be determined according to the product manual or relevant standards, and used within the validity period to ensure that its performance meets the requirements.

Precautions for the Use of Polyaspartic Acid     

Preparation before use: Before use, ensure that the working environment is dry and clean, and avoid contaminating materials with dust, impurities, and other contaminants. At the same time, appropriate personal protective equipment such as gloves, masks, etc. should be worn.

Dissolution and dilution: Kyselina polyasparágová  usually needs to be dissolved or diluted before use. Dissolve according to the proportions and methods specified in the product manual to avoid excessive dilution or concentration. The diluted solution should be used as soon as possible to avoid performance degradation caused by prolonged storage.

Avoid frequent dissolution and freeze-drying: In order to maintain the stability of polyaspartic acid performance, frequent dissolution and freeze-drying operations should be avoided. These operations may cause structural damage or performance degradation of the material.

Mixing and Reaction: When polyaspartic acid is mixed or reacted with other substances, sufficient testing and evaluation should be conducted in advance to ensure the safety and effectiveness of the reaction. At the same time, reaction conditions such as temperature, pressure, pH value, etc. should be strictly controlled.

Waste disposal: After use, polyaspartic acid waste should be disposed of in accordance with local environmental regulations and should not be discarded or discharged into the environment at will.

In summary, the correct storage method and usage precautions are of great significance for ensuring the stable performance and safe use of polyaspartic acid. In practical operation, relevant regulations and standards should be strictly followed to ensure the effective utilization of materials and environmental protection.

As a company specializes in producing and marketing a large group of biodegradable functional chelants and complex agents product , our business scope is very broad . We have polyaspartic acid , iminodisuccinic acid tetrasodium salt , chelant , chelator , micronutrient fertilizer , l aspartic acid , polyglutamic acid , polysuccinimide and kyselina polyepoxyjantárová . The polyaspartic acid price in our company are reasonable . If you are interesting in our product welcome to contact us!